Newest Auto Gas Cylinder Pressure Gauge

Description of Cylinder Pressure Gauge:

It is a professional tool for commercial or occasional use,It can

quickly set up on your car to give you accurate readings for finding faults in valves / piston rings / cylinder bores or head gaskets.

        It is suitable for all petrol engines,Fitted with 65mm diameter gauge which has two scales psi and kpa,Scales range from 0 - 300 PSI and 0 - 2000 kpa,Includes quick coupling 150mm rigid stem with cone type adaptor and 320mm flexible adaptor with 14 and 18mm screw in adaptors.

And quick release / disconnect makes it easier to reach obstructed plug ports.quick release pull down coupler is easy and fast which allows you to switch between the flexi and the rigid tube.

Operational principle and structure

Type Cylinder Pressure Gauge consists of pressure gauge, button, quick connector, hose and straight tube. The pressure gauge consists of connector, Bourdon tube, dial plate and indicator.

When it is used, compressed gas in cylinder flow into the pressure gauge through rubber stopper or copper connector of measuring part, which brings displacement of free end of the Bourdon tube, and as a result, the indicating needle rotates by means of gear drive to indicate pressure value on the dial plate.

Copyright Notice：This article belong to Shenzhen Shumatt Auto Technology Co.,ltd.All Right Reserved. If you need reprinted,pls note it from Shumatt Company,Thank you !!